HF3015C-1500W IPG laser cutting machines cnc for metal
Hymson Laser Cutting Machine are distinct from traditional laser machine. Since the laser never makes physical contact with the metal, there is little to no wear on the equipment, and there is less opportunity for the material to become contaminated. In addition, fiber laser cutting leaves much fewer burrs than traditional laser equipment so your product is virtually flawless.
· Application
Metal crafts, Decoration, Case and cabinet, Electronic cabinet, Elevator, Lamps and lanterns, Kitchenware, Sheet metal parts,etc.
------------------------------------------------------- Equipment Structure -----------------------------------------
| Hymson Double-stage |
Old-style Up and down exchange board |
Similar Double-stage |
Doual-motor & Double chain configuration
8 sets of high strength chains |
Simple high and low lift structure |
Single-motor & Sigle-chain |
|
Structural and Exchange performance stabilit
Avoid deviation or collision |
Slow speed
poor stability |
Easy to deviation |
|
| Zero positioning consistent |
Zero positioning consistent |
Zero positioning has deviation |
| Stability exchange speed within 8~15s |
common exchange speed within 30~60s |
Common exchange speed within 8~15s |
| Flexible setting linkage system or running independently |
Only linkage system |
Only linkage system |
| Easy to handle freezes and crashes |
Difficult to handle |
Difficult to handle |
| Easy to clean the waste under the machine tool |
/ |
/ |
Meet special Plate loading and unloading
Single-motor & Sigle-chain |
/ |
/ |
|
· The utility of honeycomb welding structure1. High precision, ensure the stability of the machine for a long time.
2. The machine tool and bea using honeycomb welded structure to ensure that the tremendous thrust from motor and reducer distribute evenly to the machine tool for greatly reducing machine vibration.-------------------------------------------------------------------------------------------------------------------------------------
· Intelligent servo exhausting system1. Hymson adopts centralized partition air draft intelligent control each subarea cylinder, excellent dust extraction .
2. Provide multiple protection on heat resistant material.-------------------------------------------------------------------------------------------------------------------------------------
· RayTools BT240 Series Cutting Head1.Max. support 4000W fiber laser generator.2. Optimize optical configuration & smooth and efficient airflow design More economical loss protection lenses.
3. High-precision vertical, optimized cutting section.
4. The rotary focus adjustment and focusing convenient.
5. Using drawer mirror base, easy accessibility.
6. conducive to high anti-material cutting and slab explosion hole sputtering.
7. Collimating lens / focus lens dual water-cooled structure, better cooling effect.-------------------------------------------------------------------------------------------------------------------------------------
· Automatic Proportional Valve1. Pneumatic components equiped AirTac, rexroth, etc
2. Freedom to choose nitrogen, oxygen, air.
3. Low pressure cutting is controlled by proportional valve automatically.
4. To help improving the effect of cutting technology and cutting effect.
5. Special processing capacity for Sharp corners / thick plate holes.
6. Reduce the artificial adjustment work, improve the production efficiency about 30%~50%.
7. Saving gas usage about 20%~40%.------------------------------------------------------------ Technical Data ----------------------------------------------
| Model |
HF3015C |
HF4020C |
HF6020C |
| Laser Power |
1500W / 2000W / 3000W / 4000W |
| Cutting Range |
3050mmX1550mm |
4050mmX2050mm |
6050mmX2050mm |
| Z-axis travel |
240mm |
240mm |
240mm |
| Positioning Accuracy |
±0.03mm/m |
±0.03mm/m |
±0.03mm/m |
| Repeatability |
±0.02mm |
±0.02mm |
±0.02mm |
| Max. Moving Speed |
120m/min |
120m/min |
120m/min |
| Max. Acceleration |
1.2 g |
1.0 g |
0.8 g |
| Equipment Weight |
60m/min |
60m/min |
60m/min |
| Max. load of worktable |
1.0g |
1.0g |
1.0g |
| Area covered |
8.8t |
11.6 t |
14.8 t |
| Power IP level |
1.2 t |
1.8 t |
2.2 t |
Aluminum(Magnesium) : 1.0~12.0mm
Brass : 1.0~8.0mm
Carbon steel : 1.0~22.0mm
